Saturday, November 17, 2018

How Much Does It Cost To Repair Hardwood Floors?


hardwood flooring repairing
Hardwood flooring has a sophisticated and beautiful style that looks wonderful when installed in any home. There’s a wide range of designs and finishes to choose from that will match effortlessly with real wood furnishings. But just like everything else, homeowners will have to deal with hardwood flooring repairing at some point in time.
Although wood flooring is an extremely popular improvement that can add value and beauty to your home. It can be a costly choice of flooring that needs ongoing maintenance to keep its visual aesthetics at all times. Wood flooring is likewise prone to repairs and damage, which could be costly to fix based on the kind of damage that was incurred.

Common Types of Damage For Wood Floors

There are numerous kinds of wood flooring material that might be used to enhance the overall look and value of your home. But nearly all wood flooring is at risk of incurring nearly the same kind of damage. A few of the most common types of damage requiring hardwood flooring repair include:
  • Scratches or light colored patches in areas that receive high volume of traffic
  • Buckled flooring caused by high moisture or leaks
  • Shelling, cupping, and splintering due to excess moisture
  • Gaps in between the floor boards because of moisture problems
  • Mold damage that include discoloration, rot, odors, as well as mold stains
  • Pet scratches and stains
Cost of Repair

The national average to repair hardwood flooring is at $876. But it typically ranges between $428 and $1334. The cost to repair low end hardwood floors is usually at $160 while the repair of high end floors is usually at $2,800.

Preventing Damage

Since leaks and moisture appear to be the main element of deterioration when it comes to hardwood flooring damage, it is essential that all homeowners deal with their home’s leaks and moisture problems under control as soon as they notice them. The sooner this kind of problem is addressed, the less damage their North Myrtle Beach hardwood flooring will have to endure.

Constant wear and tear on hardwood flooring can lead to a lot of damage over time and it can be quite expensive to repair. If you wish to prevent scratches and imperfections from happening, you must change rugs or mats in areas with high foot traffic like the main entrance or the hallway. If you have pets inside your house, be sure that their claws are trimmed to prevent more scratches. When you are moving around the furniture, be sure to lift and carry your things to get rid of accidental gouges or scrapes in the flooring. To prevent the floor’s brilliant color from fading, invest in good quality blinds and window treatments that can block harmful UV rays.

You should also keep your hardwood flooring clean and free of mold and mildew as this can help extend the life of your wood material and reduce the need for hardwood flooring repairs. You need to stick to a routine cleaning schedule that includes sweeping the dirt, wiping away spills immediately, and using a cleaning solution that can get rid of dirt, grease, as well as other elements that are caused by daily wear and tear.

Call NMB Flooring Pros if you need help with the installation, repair, or refinish of your hardwood floors.


NMB Flooring Pros
North Myrtle Beach, SC 29582
843-353-2997
http://nmbflooringpros.com

Saturday, November 10, 2018

Do You Need Underlayment When Installing Hardwood Floors?


hardwood flooring installation
Hardwood offers a sturdy flooring material that can last for many years. Hardwood flooring are best used in dry areas in your home like the living room, bedrooms, and dining room. Laminate flooring looks a lot like solid hardwood flooring but it is made up of different materials and needs a distinct type of installation. Compared to laminate flooring, hardwood flooring does not require padding. Keep in mind that proper hardwood flooring installation is essential in making sure that your hardwood floor lasts for decades.

Padding

One common type of underlayment for laminate flooring and carpets is padding. A few types of laminate flooring have an attached pad while others need sheets of foam padding before you can install the floor boards over the top. An authentic hardwood flooring doesn’t need padding, even though it does require a kind of fabric between the surface and underlayment.

Considerations

Underlayment padding assists in cushioning areas of laminate flooring. Protecting the laminate, keeping it in place, and providing product longevity is the primary purpose of this material. Compared to the padding placed under the carpet, this kind of underlayment padding is way too thin, which means you won’t feel it whenever you walk across a laminate floor. Hardwood floors don’t need underlayment padding however, they might creak and squeak when you set the surface boards against the underlayment. The friction created when wood rubs against wood is among the most common causes of floor creaks.

Proper Material

Hardwood flooring installation materials typically use asphalt felt paper or building paper between the hardwood flooring and the underlayment. These durable and sturdy types of paper sheeting help prevent the wood surfaces from rubbing together whenever you walk, assisting in the elimination of the probability of hearing those annoying floor squeaks and creaks.

Hardwood Flooring Installation

The installation method needed for your hardwood flooring project will depend on the type and brand of paper and hardwood you opt to use. Always follow the instructions provided by the manufacturers once you install the flooring products. The typical method for hardwood flooring installation is to clean out the underlayment’s surface, roll the paper out, staple it in their correct places, and then install each wooding flooring planks. Laying the paper over the bare, and clean subfloor that’s free of debris and grit will assist in reducing the risk of paper rips and tears.

Hire A Pro Or Go DIY

If you want to install the hardwood flooring yourself, you will find lots of DIY tips online to make your job a lot easier.

To make sure that you obtain the correct price for your hardwood flooring project, be sure to get estimates from at least three North Myrtle Beach hardwood flooring installation contractors. Companies that handle flooring projects must provide you a better price compared to a general contractor. A company does not require a license to do hardwood flooring installation. However, it is best to go with professionals like NMB Flooring Pros.

Call NMB Flooring Pros for hardwood flooring installation, repairing, and refinishing.


NMB Flooring Pros
North Myrtle Beach, SC 29582
843-353-2997
http://nmbflooringpros.com

Saturday, November 3, 2018

Tips For Repairing Your Hardwood Flooring


hardwood flooring repairing
Even the finest hardwood floors will encounter some problems later on. For example, wood is susceptible to scratching compared to other types of flooring. Other issues range from a simple surface damage to major structural defects to squeaks – which is considered as the most annoying issue that most wood floors fall prey to. To help you with these provided below are some hardwood flooring repairing tips.

There is no simple method to avoid gouges and scratches. They are bound to happen because of the regular wear and tear. Nor can you avoid problems that are brought on by wood contraction and expansion. Wood is a naturally porous and fibrous material. It contracts and expands due to the changes in humidity and temperature. Because of this, boards can warp or separate, and nails can also loosen up. The natural settling of a home may also lead to the separation of the subfloor and the joists. In case your floor is uneven or sagging, a major structural problem might be causing it. In this case, you have to talk to a professional flooring contractor.

Scratches

You can easily buff away minor scratches on your hardwood floors using progressively finer sandpaper grits or steel wool. You can limit the sanding to the affected area, feathering slightly into the nearby surfaces. Buff or sand only in line with the wood grain. However, you also need to know that polyurethane finishes are hard to sand. You can try to use a scouring pad that is dipped in mineral spirits or you can also use a sanding screen. If your hardwood floors have been coated with a polyurethane finish, you should never wax it. This will make it impossible to recoat later on where without the need to sand it first.

Watermark Stains

Water and wood floors are never compatible. In case somebody left a water mark ring from a cold glass or hot coffee cup on the floor, you may be able to extract the stain. Fold the rag or white cloth in half and place it over the stain. The next thing you need to do is set the iron back and forth over the area that has the water mark stain. You have to get this done gradually, inspecting frequently so you will know if the stain is disappearing and to avoid causing further damage. Hardwood floors may also have large water stains that are caused by spills or perhaps over watering house plants. The affect spot should be sanding and bleached in some cases, and then refinished so they will match the rest of the floors, which can be very tricky. It is also best to hire professionals offers North Myrtle Beach hardwood flooring repairing, especially if the stain is located in a visible spot.

Damaged Wood Flooring

If you are dealing with damaged hardwood flooring, you have to remove and replace it with new ones. Hardwood floor repairing of damaged sections involve taking out a part of the finish flooring and then nailing or gluing replacements to the subflooring, filling the cracks, sanding, and the refinishing the surface. In case you are not experienced in this kind of work, you will find it hard to get the new boards to match the old. You can always hire an expert like NMB Flooring Pros to help you.

Call NMB Flooring Pros if you need professional hardwood floor repairing services.


NMB Flooring Pros
North Myrtle Beach, SC 29582
843-353-2997
http://nmbflooringpros.com

Friday, October 26, 2018

Tips For Avoiding Pitfalls During Hardwood Flooring Installation


hardwood flooring installation
Many homeowners consider hardwood flooring installation as a daunting task. It is also true that not all DIYers are up to the challenge. A stunning hardwood floor is the consequence of careful planning and a few crucial know-how. The information provided below is not meant to serve as a guide for the installation of hardwood flooring but how to stay away from the common pitfalls. If you are among the brave souls who plan to undertake this project, here are five tips to help ensure your success.

Inspect Your Subfloor

In case your subfloor is in a bad state, putting down hardwoods will not help. You have to have a level subfloor, and any alterations in the height must be no more than 3/6” over a 6’ span. There are a few different methods to level out your subfloor. The simplest case happens when OSB or plywood is not anchored down extremely well and the addition of a handful of screws will address the problem. More serious measures include planing the joints or perhaps the installation of another layer of plywood with the right filler to accomplish uniformity.

Acclimate The Wood

Increased moisture makes the wood expand while less moisture lets it contract. This is referred to as wood movement. It is crucial for hardwoods to acclimate in the area where they will be installed. Wood that’s not fully acclimated will lead to gaps during the winter and may even cause cupping during the summer season. To prevent this from happening, open and distribute the boxes for a week and make sure that you run the air conditioning unit or heating system at normal levels. Do not store the hardwoods in an unfinished environment or any similar setting that is rich in moisture.
Even after the appropriate acclimation, the wood will contract and expand as moisture levels alter. That is why it is a must to leave around ¼” gap around the perimeter of the area where you will be installing the hardwood floors. Don’t worry because this will be covered with a baseboard and molding. In case moisture is the primary problem in your area, you need to think about installing engineered wood since they do not usually require acclimation.

The first Row Needs To Be Straight

According to NMB Flooring Pros, it is extremely important for the first row of hardwoods to be straight upon installation since each row after will be placed relative to it. If the first row is crooked, it will lead to huge curves once you move on through the area. Exterior walls are usually not square so think about marking the locations of your joists and set up the hardwoods perpendicular. Be sure that you drive a fastener into the joist at every opportunity. Think about what hindrances are present and how varying starting points can make your job much easier.

Top Nail, Glue The Boards

You will come across situations wherein the flooring nailer won’t fit such as when you are laying the final board. You need to face nail or top nail these boards. Get your wood glue and add in a bead into the groove of the last board. Use a pry bar and a scrap wood to wedge these boards securely in their proper place. Don’t forget to hold the finish nailer with enough force so it won’t jump around and mar the board’s surface.

Rent or Buy The Correct Tools

Don’t fool yourself that you can create rip cuts using a jigsaw or that you do not really require a pneumatic flooring nailer. Having the correct North Myrtle Beach hardwood flooring installation tools is going to make your job a lot easier and the completed product look much better.

All these are unique challenges in every hardwood flooring installation project. Hopefully, the above tips can help you in addressing some of them. With the right planning, preparation, and a great start, you will be rolling along in a short period of time.

Call NMB Flooring Pros if you need in installing your hardwood floors.


NMB Flooring Pros
North Myrtle Beach, SC 29582
843-353-2997
http://nmbflooringpros.com

Thursday, October 25, 2018

What You Need To Know Before Choosing A Hardwood Floor

hardwood flooring
Hardwood flooring is a favorite choice among homeowners. This type of floor is available in different colors, styles, species, and cuts. Whether the flooring is engineered or solid, hardwood flooring can be a wonderful addition to a home’s visual aesthetics. But before you make your final choice, there are several things you have to know and questions you need to ask.
Benefits of Hardwood Flooring 

There many benefits of hardwood flooring installation compared to other available options like vinyl or carpet. The easy installation and low maintenance requirement are only a few. This type of floor does not build up a lot of dust, dirt, or debris. Mopping and vacuuming every week is enough to maintain its cleanliness. Top quality hardwood floors are likewise extremely strong. Compared to vinyl, hardwood floors are durable and can last for many years if finished to certain standards. Because of this, hardwood floors are considered as an excellent long-term investment that can also increase the overall value of your property.

Engineering

There are many factors to consider before deciding on the best type of North Myrtle Beach hardwood flooring for your home. The first thing you need to ask yourself is if you prefer an engineered or solid wood floor. The latter is solid all the way and can be used anywhere, can be sanded as well as refinished several times. They are perfect for living rooms, bedrooms, and kitchens. Meanwhile, engineered wood floors are created using different layers of veneers, either of different or the same species. This laying creates stable flooring. It expands and contracts less with changes in humidity and temperature.

Species, Uses, and Finish

You can choose from light woods, medium woods, and dark woods. Once you have decided on the look, the next thing you should know about is how the room is being used, and then factor in the durability of your selected wood. For instance, for a family with kids, it might be better to choose a wood type that is more hard wearing compared to the flooring type that a retired couple requires.
In terms of its finish, you have to decide whether you want a factory finished or site finished flooring. As its name suggests, a site finished flooring means the finish is applied during the installation at the site. This gives the homeowner the freehand to choose the sheen and stain of the final flooring. However, this will cause a lot of noise and dust during the installation process but you are guaranteed to have lots of customization options. Meanwhile, a factory finished floor cuts down on the inconveniences during installation but your customization options will be limited as well.
Finally, you have to consider the hardwood flooring maintenance. Once your floor has been installed, you need to keep in looking nice and clean all the time. If you have pets, you need to clip their nails and place rugs to cut back on the amount of grit and dirt brought inside your home. You also have to clean your floor on a regular basis through sweeping, vacuuming, and mopping.

For expert assistance regarding hardwood flooring, call NMB Roofing Pros now.



NMB Flooring Pros
North Myrtle Beach, SC 29582
843-353-2997
http://nmbflooring pros.com

Friday, October 19, 2018

Factors To Consider Before Refinishing Old Hardwood Floors


hardwood flooring refinishing
Renewing your hardwood flooring may be easier and cheaper that you initially thought. That is because you may not have to deal with sanding and staining your old hardwood floor just to unlock its beauty, especially if it is not damaged. To determine the best solution that will work best for your home, provided below are some important things you have to consider before staring your hardwood flooring refinishing project.

Is It Dull As Dirt?

We all know that dust and dirt can make any type of floor look dingy. However, you might be surprised to find out that when tracked, both can cause superficial scratches that can dull the floor’s surface. The good thing is restoring floors that are dirty and have lost their sheet can be relatively simple.

Deep Cleaning

Giving your floor a good deep cleaning might resort its former luster. You can start by sweeping the floors using a soft bristle broom. Don’t forget that stiff bristles can cause wood scratches on your floor’s surface. The next thing you have to do is vacuum your hardwood floor to get rid of hard to reach dirt in corners as well as floorboards. Then, mop using concentrated cleaner and a micro cloth. Never use vinegar, steam, water, and certain cleaners that produces suds to clean your hardwood floors. Hardwood floors in areas in your home that receive high foot traffic might need a deep cleaning by a flooring professional. They usually use scrubbing machine that is made specifically to get rid of embedded dirt in hardwood floors.

Once this is done, you can keep your floors in good condition by cleaning the surface at least three times per week using a micro cloth or a vacuum. Deep clean the floor at least once a month and have it professionally deep cleaned at least once a year.

DIY a New Finish Without Sanding

In case deep cleaning did not restore your wood floor’s original glow, you can give it a brand new fresh look without the need to sand or stain. You can find kits that include a semi glossy polyurethane finish without altering the color of your floor. It will take 24 hours to dry and about one or two weeks to cure. Please note that this stuff does not work well with waxed wood floors. You will also find products that can restore your wood floor’s existing polyurethane finish. It provides a high gloss sheen that can last for six months. Lastly, you can also find products that is designed to restore previously seals old hardwood woods. They are available in both glossy and satin finishes. Of course, another option is to hire an expert from NMB Flooring Pros.

If Refinishing Is The Best Option

Unfortunately, there are times when hardwood floors that need more than just quick fixes. Grimy, dry floors with wide gaps and deep scratches require North Myrtle Beach hardwood flooring refinishing. This task is labor intensive and involves a lengthy process. If you are planning to DIY, you need to be knowledgeable about every step from sanding to staining.

If you want your hardwood floors to look great, you can find local flooring contractors like NMB Flooring Pros. Call us now if you want to know more.


NMB Flooring Pros
North Myrtle Beach, SC 29582
843-353-2997
http://nmbflooringpros.com